The iPP320 does not have an ON/OFF button. Therefore, powering on the iPP320 is as simple as connecting its power adaptor cable to a power source. The iPP320 comes with two cables: the Power Adaptor cable, and the PIN Pad cable. Refer to the images below for more information.
The PIN Pad cable The Power Adaptor cable
The PIN Pad cable |
The Power Adaptor cable |
|||
Ethernet connector (this connects to Wi-Fi router) |
Barrel connector (this connects to the Junction box) |
|||
Junction box (featuring power port) |
This connects to the power source (wall outlet or surge protector) |
|||
HDMI connector (this connects to the back of the iPP320 PIN Pad) |
Connect the Power Adaptor cable's barrel connector to the power port on the PIN Pad cable's junction box .
Connect the other end of the Power Adaptor cable to a power source such as an outlet or surge protector.
NOTE: You must use the exact power adaptor and cables provided by Moneris to work with the iPP320 PIN Pad. Failure to do so may affect the operability of or cause damage to the equipment.
● Hold down the yellow key and press the alphanumeric key at the same time. The PIN Pad will beep and restart.
Connecting the iPP320 PIN Pad to the Router